BT801 Smart Equalizer

$84.95
(19 reviews) Write a Review
Weight:
1.00 LBS
BT801 Smart Equalizer
  • The BT801V and BT801X may have a longer wait time of 2-3 weeks
  • The "original" low-heat plug-in computerized load equalizer
  • OEM connectors provide Plug-N-Play simplicity
  • Unusually small size - perfect for motorcycle applications
  • Automotive quality package using mil-spec epoxy
  • Engineered and produced in the United States
  • Limited Lifetime Warranty
  • Fixes fast flashing issue when LEDs are added
  • Only one needed per bike

If you have a question about your bikes lighting connector please physically check on your bike or in your bike manual. Also feel free to call us on the phone.

 

Reviews

  • 5
    Best Load Equalizer for the V Rod on the market

    Posted by Jeff on 14th Jul 2020

    The Staff and Comuncation was great, After the product arrived it was pretty straight forward installing it, very well built.

  • 5
    Great products

    Posted by Unknown on 13th Mar 2020

    Works perfect. Easy install. Plug and play.

  • 5
    Great products

    Posted by Unknown on 13th Mar 2020

    Works perfect. Easy install. Plug and play.

  • 5
    Perfect solution!

    Posted by Shawn on 18th Aug 2019

    With plug and play simplicity, this product fixed the fast flash and security light issue on my 09 VRSCDX. I couldn’t be happier!

  • 5
    Hassle free. Works like a charm.

    Posted by Constantin on 13th Feb 2019

    Just plugged it on my NRS 2016 with 4 LED turn signals installed and it works perfectly. I didn't even have to disconnect the battery after plugin it. Just activate the right turn signals 4 times (or more) then the left and it works just like this. 100% recommended.

  • 5
    Solved red key light on speedo and fast blinking signals completely.

    Posted by Rick Carney on 2nd Feb 2019

    Mike and Donna at Biketronics were very exceptional.
    My bike is a 2013 Road Glide Ultra. They solved the red key light on my speedo and fast blinking turn signals. Donna would have solved my problem on the first phone call I made, except I gave her some wrong information (bad thing to do when you are asking for help). Because of my poor communication, it took four phone calls, and me continuing to check symptoms myself on my bike before I finally gave Mike the correct information. He and Donna asked all of the right questions, but I made it much more difficult with my wrong answers. Thankfully, they didn’t give up on me and were very polite through the whole process. I imagine they had a conversation about me being an idiot and wasting a lot of their time. Mike is a genius on the electronics of Harleys. In a few days my BT801 Smart Load Equalizer showed up in the mail. About 10 minutes later, my problem was solved. No more red key light lit on my speedo and normal blinking speed of turn signals. I bought the bike used and LED turn signals were already on it. Apparently whoever installed the LED’s didn’t know about the need for the load equalizer or about Mike and Donna at Bike Tronics. So, if you have LED turn signals and a red key light lit on you speedo as well as fast blinking turn signals, depending on your bike, one of their Load Equalizers is the answer for you. This had been driving me crazy for a long time and THANKS to Mike and Donna, all is well.

  • 5
    If I could give it 10 stars, I would. BT801 SMART EQUALIZER

    Posted by Kevin In Pennsylvania on 7th Mar 2018

    This thing does it's job, and does it well. It takes care of all issues with quick flash and other issues with the inferior resistor (IMO), products out there. Heat problem is no issue any longer, Buy Biketronics and worry no more about melting body parts or wiring. Top Notch in every respect. No longer do I have to worry. My Bikes will wear Biketronics gear.

  • 5
    Plug and Play

    Posted by Steve Lowry on 2nd Mar 2018

    Changed out VRSCDX front and rear turn signals to LED. Easy install and works like a charm.

  • 5
    Works as advertised.

    Posted by jkaeb45@bellsouth.net on 7th Dec 2017

    Instructions are clear and now my red key and fast blinking blikers on my 08 v rod vrscaw work normally.