Ask about our new ultra package!
Combines the amazing power and clarity of the BT2180 amplifier with your choice of in-fairing speakers.
BT2180 Description
- Hi-Tech High-Efficiency Switching Amplifier
- Very low distortion .05% THD
- 2 channel, 2 ohm stable
- 360 Watts RMS total output at 4 ohm, 720 Watts peak total output
- 180 Watts RMS per-channel at 4 ohm, 360 Watts peak per-channel
- Very compact 5"x5"x1.8"
- Will power four, 4 ohm speakers connected in parallel
- Powered by patented "UcD" technology
- Protects charging system w/StartorGuard technology
- Works on most touring bikes
- Designed and manufactured in USA
- Lifetime Warranty
See installation instructions here.
BT2180 Fitment
- Any 1996 - 2013 Harley RG or FLH with an aftermarket radio
- Any Pre 2015 RG with a stock radio.
- 2006 - 2013 FLH with stock radio, might have to relocate any "add on" HD modules from the top of the radio.
- ALL CVO bikes may need extra parts to allow plug n play. PLEASE CALL BEFORE ORDERING
| HAT Unity Coax 6.5" |
Hertz 6.5" (MPX 165.3) |
Titan II 7.1" |
- 6 1/2" Speakers are a huge speaker upgrade - 53% over Harley™ stock!!
- No modifications required - bolt in, plug-in and go!*
- Free-flow grill design ensures maximum sound transfer (RG kit uses stock grill)
- High quality glass-reinforced nylon adapters
- Complete with stainless steel mounting hardware
- 100 watts RMS / 230 watts peak
- 50Hz-22kHz
- 93.2 dB
- 4 ohm - will work on any system rated for 1, 2, or 4 ohms. (It is safe to go higher resistance on a speaker, just not lower)
- Water Resistant
- 1-Year HAT(Hybrid Audio Technology) warranty
HAT Unity 6.5" Fitment
- HAT EG: For Electra Glide fairing 1996 to 2013
- HAT RG: For Road Glide fairing 1998 to 2013 - See note for pre-2006* and 2012-2013 RoadGlide CVO**
|
- Coax tweeter allows for one single linear-phase emission point
- Low tweeter resonance frequency
- No modifications required - bolt in, plug-in and go!*
- Free-flow grill design ensures maximum sound transfer (RG kit uses stock grill)
- High quality glass-reinforced nylon adaptersComplete with stainless steel mounting hardware
- 100 watts RMS / 200 watts peak
- 92 dB at 1 watt efficiency
- 4 ohm - will work on any system rated for 1, 2, or 4 ohms. (It is safe to go higher resistance on a speaker, just not lower)
- Water Resistant
- 1-Year Hertz warranty
Hertz 6.5” Fitment
- HZ471: For ElectraGlide fairing 1996 to 2013
- HZ472: For RoadGlide fairing 1998 to 2014 - See note for pre-2006* and 2012-2013 RoadGlide CVO**
|
- 7.1" Speakers are the ultimate speaker upgrade - 83% over stock Harley speakers!
- No modifications required - bolt in, plug-in and go!
- Free-flow grill design ensures maximum sound transfer (RG kit uses stock grill)
- High quality glass-reinforced nylon adapters
- Complete with stainless steel mounting hardware
- 120 watts RMS / 240 watts peak
- 94 dB at 1 watt efficiency
- 49-22khz
- 4 ohm - will work on any system rated for 1, 2, or 4 ohms. (It is safe to go higher resistance on a speaker, just not lower)
- Water Resistant
- Lifetime warranty
Titan II 7.1" Fitment
- BT7P1: For ElectraGlide/StreetGlide fairing 1996-2013
- BT7P1RG: For RoadGlide fairing 1998 to 2013 - See note for pre-2006* and 2012-2013 RoadGlide CVO**
|
* Pre-2006 RoadGlides must be updated to newer style grill assembly, parts available for purchase through most local Harley dealerships, PN: 77021-98B and 77022-98B. If you have trouble locating these parts feel free to call Biketronics at 1-800-735-2419 for assistance.
** Titan II 6.5" or 7.1" upgrade will not fit 2012 - 2013 Road Glide CVO without backdating to 77021-98B and 77022-98B grills.
